Bienvenido! Aquí usted puede subir sus pastes (códigos) para posteriormente compartirlos, inclusive puede protegerlos con password. Siéntase libre de explorar :)

Subido por Anonymous el September Fri 25th 2:48 PM - Nunca expira
Descargar | Nuevo Paste

  1. sudo hdparm -Tt /dev/sda1
  2.  
  3.  
  4. /dev/sda1:
  5.  Timing cached reads:   904 MB in  2.00 seconds = 451.98 MB/sec
  6.  Timing buffered disk reads: 166 MB in  3.01 seconds =  55.18 MB/sec
  7. [email protected]:~$ sudo hdparm -i /dev/sda1
  8.  
  9. /dev/sda1:
  10.  
  11.  Model=HDS722580VLAT20, FwRev=V32OA60A, SerialNo=VNR21EC2D88Y
  12.  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
  13.  RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
  14.  BuffType=DualPortCache, BuffSize=1794kB, MaxMultSect=16, MultSect=16
  15.  CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480
  16.  IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
  17.  PIO modes:  pio0 pio1 pio2 pio3 pio4
  18.  DMA modes:  mdma0 mdma1 mdma2
  19.  UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
  20.  AdvancedPM=yes: disabled (255) WriteCache=enabled
  21.  Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:  ATA/ATAPI-2,3,4,5,6
  22.  
  23.  * signifies the current active mode
  24.  
  25.  ----------------
  26.  
  27.  sudo hdparm -tT /dev/sdb
  28.  
  29. /dev/sdb:
  30.  Timing cached reads:   978 MB in  2.00 seconds = 488.98 MB/sec
  31.  Timing buffered disk reads: 168 MB in  3.03 seconds =  55.39 MB/sec
  32. [email protected]:~$ sudo hdparm -i /dev/sdb
  33.  
  34. /dev/sdb:
  35.  
  36.  Model=ST3120022A, FwRev=3.54, SerialNo=5JS196JN
  37.  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
  38.  RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
  39.  BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
  40.  CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
  41.  IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
  42.  PIO modes:  pio0 pio1 pio2 pio3 pio4
  43.  DMA modes:  mdma0 mdma1 mdma2
  44.  UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
  45.  AdvancedPM=no WriteCache=enabled
  46.  Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:  ATA/ATAPI-1,2,3,4,5,6
  47.  
  48.  * signifies the current active mode
  49.  ---------------------------
  50.   sudo hdparm -tT /dev/sdc
  51.  
  52. /dev/sdc:
  53.  Timing cached reads:   936 MB in  2.00 seconds = 467.88 MB/sec
  54.  Timing buffered disk reads: 120 MB in  3.03 seconds =  39.67 MB/sec
  55. [email protected]:~$ sudo hdparm -i /dev/sdc
  56.  
  57. /dev/sdc:
  58.  
  59.  Model=ST360021A, FwRev=3.75, SerialNo=3HR0KAEX
  60.  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
  61.  RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
  62.  BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
  63.  (maybe): CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117229295
  64.  IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
  65.  PIO modes:  pio0 pio1 pio2 pio3 pio4
  66.  DMA modes:  mdma0 mdma1 mdma2
  67.  UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
  68.  AdvancedPM=no WriteCache=enabled
  69.  Drive conforms to: Unspecified:  ATA/ATAPI-1,2,3,4,5
  70.  
  71.  * signifies the current active mode
Lenguaje:
Para seńalar algunas líneas en particular, al inicio de cada línea pon: @@





© 2017 - Powered by PASTE 1.0. Traducido al ESP y modificado por DesdeLinux.net